CE SGS TUV 24000 Caps/H Powder Capsule Filling Machines
High Speed Small Capsule Medical Coffee Powder Filling Machine
Features:
1. Small size, low energy consumption, easy operation and easy
cleaning.
2. Products are standardized, equipment parts are interchangeable, and
the replacement of molds is convenient and
accurate.
3. With the design of cam lower, the pressure atomizing oil pump is increased, the lubrication in the cam groove is
maintained, the wear is reduced, and the service life of parts is prolonged.
4. Using high-precision protractor, the vibration is small, the working noise is less than 80 dB, and using the
vacuum positioning mechanism, the rate of capsule on machine is over 99.9%.
5. Based on the lower plane of the dose disk, three-dimensional adjustment is adopted, and the gap is even,
which effectively guarantees the difference of the loading capacity, and is very convenient for cleaning.
6. Man machine interface, complete functions. In case of any failure of the material shortage and the material
channel, the automatic alarm, automatic shutdown, real-time measurement of each grain and the display
function of cumulative output.
Product Application:
This new mini-automatic blister packing machine is wildly used in small pharmacy factory, dosage room of
hospital, research institute of pharmaceutical factory ,health products factory ,food products factory and
hardware factory for packing capsule, tablet, milk tablet ,candy and so on.
Performance characteristics:
1. The new high-power transmission mechanism in China is adopted, and the main transmission shaft is
driven by chain arrangement, which avoids the error and noise of other gear transmission.
2. The electric appliance adopts the imported control system, so it can be equipped with the device of
missing material and missing particle detection and rejection according to the customer's requirements.
3. The whole machine adopts sectional combination: PVC forming, feeding and heat sealing are in one
section, while the tropical aluminum cold forming, heat sealing and blanking are in one section for split
packaging.
4. Using photoelectric control system, PVC, PTP, rigid aluminum packaging automatic feeding, waste edge
automatic punching device to ensure the long-distance multi-station synchronization stability.
5. It can also be equipped with photoelectric detection and correction device, imported stepping motor
traction, graphic printing and packaging to optimize the grade of packaging materials.
6. This machine is suitable for: blister-sealed packaging of capsules, plain tablets, sugar-coated tablets, gel
pills, injections, special shapes, etc
Technical parameter:
| Model |
400C |
800C |
1200C |
2000C |
3000C |
| Capacity |
24000caps/h |
48000caps/h |
72000caps/h |
120000caps/h |
210000caps/h |
| Power |
380/220V 50/60Hz 5kw |
380/220V 50/60Hz 5kw |
380/220V 50/60Hz 6kw |
380/220V 50/60Hz 10kw |
380/220V 50/60Hz 12kw |
| Machine size |
1080*1240*1950mm |
1080*1240*1950mm |
1180*1340*1980mm |
1500*1350*2100mm |
1386*1156*2100mm |
| Weight |
800KG |
800KG |
1000KG |
1600KG |
2500KG |
